How do I link a Honeywell wireless siren to my Honeywell Apartment Alarm Kit or Home Alarm Kit?

  1. Enter Programming mode by pressing the Programme button followed by swiping a contactless tag or entering your PIN code. The keypad will play a melody to indicate success.

    ka_user_pin_code_reset_1 ka_test_mode_2 ka_programming_mode_3

  2. Remove the battery cover on the rear of the Siren and locate the row of dip switches. Ensure that dip switch 5 is set to the OFF position as shown in the diagram.

    bss_control_panel

  3. Locate the Learn button on the rear of the Siren, to the left of the row of dip switches. Press and hold for 5 seconds. The siren will beep once to indicate it is in Learn mode, and the LEDs will start flashing.

    ka_programming_mode_38 bss_external_siren_21

  4. Press the Arm button on the keypad within 30 seconds. The siren will confirm that it has been linked to the keypad by producing a series of beeps.

    ka_programming_mode_39 ka_programming_mode_40

  5. After 30 seconds, the keypad will play a melody. You can now exit programming mode on the keypad by pressing the Programme button again.

    ka_test_mode_7 ka_user_pin_code_reset_1