How do I re-link an existing wireless door and window sensor or indoor wireless motion sensor (PIR) to my Honeywell Apartment Alarm Kit or Home Alarm Kit? Or how do I link additional sensors?

  1. Enter Programming mode by pressing the Programme button followed by swiping a contactless tag or entering your PIN code. The keypad will play a melody to indicate success.

    ka_user_pin_code_reset_1 ka_test_mode_2 ka_programming_mode_3 

  2. Select a Zone number 1 – 3 that you want to link the sensor to.

    ka_programming_mode_10

  3. To link a new wireless motion sensor, either remove the battery isolation tab from the sensor, or push the tamper button, located inside the battery compartment on the back of the sensor.

    ka_linking_a_new_motion_sensor_5 ka_linking_a_new_motion_sensor_6

  4. To link a new wireless door and window sensor, either remove the battery isolation tab from the sensor, or slide open and close the battery cover.

    ka_linking_new_magnetic_door_window_sensor_6 ka_linking_new_magnetic_door_window_sensor_7

  5. If the sensor is already linked to the keypad, the keypad will play an alert sound. If the sensor has been successfully linked to the keypad, the keypad will play a melody.

    ka_programming_mode_50

  6. Exit programming mode by pressing the Programme button again.

    ka_user_pin_code_reset_1