How do I change the batteries on the Battery Siren?

If you have a remote control key fob

  1. If the battery is not completely drained, using any linked Remote Control, first place the Siren into Service mode by pressing and holding the disarm button for 5 seconds. The siren will produce 2 short beeps followed by 1 long beep to confirm that it is now in Service mode.

    siren_service_mode

  2. Loosen the lower screw and take the Siren off the wall. Loosen the two screws and open the battery compartment. Replace the batteries, refit the battery cover, tighten the screws and replace the Siren onto the wall, making sure to tighten the lower screw.

    ka_maintenance_24 ka_maintenance_25 ka_maintenance_26 ka_maintenance_27 ka_maintenance_28 ka_maintenance_29 ka_maintenance_30 ka_maintenance_31

  3. Place the siren back into Operating mode by pressing and holding the disarm button  again for 5 seconds. The siren will produce 1 long beep followed by 2 short beeps to confirm that it is now in Operating mode.

    siren_operating_mode

If you do not have a remote control key fob

  1. Enter Test mode by pressing the disarm  button on the keypad, followed by swiping a contactless tag or entering your PIN code. The keypad will respond by playing a melody.

    ka_test_mode_1 ka_maintenance_2

  2. Now press the number 8 on the keypad. The siren will produce 2 short beeps followed by 1 long beep to confirm that it is now in Service mode.

    siren_operating_mode_keypad

  3. Loosen the lower screw and take the Siren off the wall. Loosen the two screws and open the battery compartment. Replace the batteries, refit the battery cover, tighten the screws and replace the Siren onto the wall, making sure to tighten the lower screw.

    ka_maintenance_24 bss_external_siren_8 ka_configuring_siren_4 ka_maintenance_27 ka_maintenance_28 ka_maintenance_29 ka_maintenance_30 ka_maintenance_31

  4. Press the number 9 on  the keypad. The siren will produce 1 long beep followed by 2 short beeps to confirm that it is now in Operating mode.

    siren_operating_mode_keypad_2

  5. Press the disarm button again on the keypad to exit Test mode. The keypad will play a melody once again to confirm.

    ka_test_mode_1